tex mix – 4 mono channels

Eurorack Modular Expandable Mixer

This is a 4 mono channels expansion. Several of these modules can be added to provide more channels. Every channel features:

  • Mono input
  • Linear VCA (only versions 1.5 & 1.6, previous version has a Vactrol Gate)
  • SEND A control (switchable PRE/POST, in PRE mode the signal is present regardless to the channel volume control but only if the channel switch is in ON position)
  • SEND B control (post-fader)
  • PAN control (only affects the master bus)
  • VOLUME control (affects the master, cue and POST sends, does not affect PRE-fader send)
  • ON/OFF/CUE switch:
    • ON – channel is routed to the master bus
    • OFF – channel is muted
    • CUE – channel is routed to the cue bus
  • Header for direct outs (only versions 1.5 & 1.6)

12 HP

13 mA +12V

8 mA -12V

Manual & assembly guide
MODULARGrid

The Eurorack Modular Expandable Mixer concept is about building a mixer depending to your needs, number and type of channels.

There are 6 modules available for the Eurorack Modular Expandable Mixer:

All modules have a vertical 10 pin connector on the back, in the central area. All modules used in the mixer must be linked.

There are 4 audio buses:

  • Master bus (stereo, main output)
  • Cue bus (stereo, planned for monitoring purposes but can be used as a stereo group)
  • Send A (mono, usually used for FX processors like reverb, delay, etc.)
  • Send B (mono, same as A)